Coordinates in AutoCAD

Those who have just started working with AutoCAD should first learn about the coordinate system of AutoCAD. When you first open AutoCAD, you see Model Space on your screen and you make your drawing in this space. You can think of the model space as a 3 dimensional paper space. Indeed, if you are going to draw something 2 dimensional and you are looking at the model from top view, then you can think of it as paper directly. Only difference between paper is that model space has no boundaries. If we remember the old days, we used to make a preliminary preparation to align the drawing in the middle of the paper by adjusting the scale also. In AutoCAD, you don’t have to worry about scaling or aligning the drawing in the middle of the paper. You can read my article “Understanding scale concept and units in Autocad” where I have explained these concepts in detail.When you first start drawing in model space in AutoCAD, probably you will mostly encounter with the problem of entering points. AutoCAD will prompt you to enter a point a strating point of a line, corner of a rectangle etc. In this article, I will explain “how to enter a point” as well as the coordinate system.

In how many different ways can we enter a point?

Answer of this question is 3. When you first step into the world of drawing with AutoCAD, for instance when you use LINE command, AutoCAD will ask you to enter a starting point first.

Command: LINE From point:

Here are the answers that you can give to this “From point:” question:

* By entering real coordinates.
* By entering relative coordinates.
* By entering coordinates by using AutoCAD drawing aid tools.

Now, let’s make our first step into drawing and learn about coordinate system by going over these topics.
1. Entering absolute coordinates

Command: LINE From point: -2,1 To Point : 3,4 To point :
Fig.2
As you can see, entering relative coordinates is done by using @ symbol from the last point and entering Δx,Δy values. @ means that we will enter relative coordinates.

3. Polar Coordinates:
Other that cartesian (x,y) coordinates, another coordinate system that you can use to enter points is POLAR coordinates system. It is a coordinate that is reached by a distance and an angle from a certain origin point. We know that angles increase in counter clockwise direction in AutoCAD ( Fig. 3).
Fig.3
After reminding this information, let’s continue to know more about POLAR coordinates. The example given in Fig. 4 explains how to enter polar coordinates by using relative coordinates.
Command: line From point: #0,0 To point: #4<120 To point: #5<30

Fig.3
After reminding this information, let’s continue to know more about POLAR coordinates. The example given in Fig. 4 explains how to enter polar coordinates by using relative coordinates.
Command: line From point: #0,0 To point: #4<120 To point: #5<30
Fig.4
Even though we are not at the topic of relative coordinates, this example is given in order not to skip entering absolute polar coordinates. # symbol at the beginning is used to mention the absolute coordinate entry. Now, let me give an example for entering relative polar coordinates.
Fig.5
Let’s go over the previous example:

Command: line From point: @3<45 To point: @5<285

As you can see, by entering @ symbol, you are saying “relative to last point”. @3<45 style="font-weight: bold; color: rgb(255, 0, 0);">Command: line From point: From point: @5<0 From point: @5<90 From point: @5<180 From point: c
As you can see, entering relative coordinates is very useful to use. Thus, it is the method that is most frequently used. However, relative Cartesians mat also be used for very rare subjects like drawing a rectangle.

Command: rectang First corner: Other corner: @5,3

This example draws a rectangle with dimensions 5×3.

3. Entering coordinates by using AutoCAD drawing aid (dynamic) tools:

If you select a point on the screen by using you mouse cursor, then you cannot enter and exact coordinate. Of course, it would be better if we could have entered the exact coordinate that we wanted just by using the mouse cursor. Since AutoCAD 2000, entering coordinates by using mouse cursor has been improved. And in final versions AutoCAD 2006 and 2007, this has been improved even better. This is called dynamic coordinate entry in AutoCAD. Now, let’s take a look the subject by giving some examples:
Angle by cursor, but distance is dynamic
Fig.6
As you move your cursor and approach to angles that are defined in POLAR settings, then you will see that your cursor is locked on that angle. As the cursor is locked, then we can move as much as we want that along the angle we are locked onto.

Angle locked, distance is dynamic
Fig.7
After selecting the first point to draw a line, if you write <45 style="font-weight: bold; color: rgb(255, 0, 0);">Distance locked, but angle is dynamic:
Fig.8
When we write 200<, then distance will be locked at 200 units and you will be prompted to enter an angle value. Lock is broken at angles specified at POLAR settings.

In future, I will give a second lesson about this subject. That’s all for now about coordinate entries. I hope it will be useful for you.